Flip chart with sticky notes from a planning session
Tudor Dumitrescu, the Founder of TANDA Digital

Cold Outreach Audience Testing: What B2B Firms Should Test First

7 min
Facebook
Twitter
LinkedIn

Test your audience first. In a client campaign we ran in September 2026, two weeks of offer tests produced zero interested replies. We then switched to testing audiences, and the campaign booked 3 meetings with $30M+ companies in 4 days. An offer can only be judged once it reaches people who have the problem it solves, so the audience test has to come before any offer test.

Most B2B firms start with the offer because it feels like the part they control. They rewrite the audit, the free consultation or the demo invitation and send it to the same list again. When the list is wrong, every version gets the same lack of replies, and you learn nothing about which offer was better.

Why should the audience come before the offer?

A cold email is read by whoever is on your list. If those people do not have the problem your offer solves, they ignore it, however well the offer is written. Zero replies from the wrong people tells you nothing about the offer itself.

That is what happened in one campaign we recently ran in September. We spent two weeks changing the offer and got no interested replies. When we moved the testing effort to the audience, 3 meetings with $30M+ companies came in within 4 days.

I wrote about this on LinkedIn at the time, because we make mistakes like this too. What we try to do is spot them quickly. Two weeks of zero interest was the signal to stop changing the offer and look at who was receiving it.

What did our own campaigns show when we split them by niche?

We run cold email for TANDA Digital as well as for clients. In the four weeks to 9 October 2026 we sent about 49,000 emails to about 24,000 leads. They produced 330 replies, a 1.38% reply rate, but most were out-of-office messages and only about 10 were positive.

About 95% of that volume went to broad campaigns. One smaller campaign went only to a very specific niche, with a done-for-you outreach offer. It produced about 1.5 positive replies per 1,000 emails sent, while the account as a whole produced about 0.2 per 1,000, so the niche campaign did roughly seven times better per email.

How can you tell whether the audience is the problem?

Start with the reply rate, because copy and offers cannot be tested until emails land in the inbox. Instantly’s Cold Email Benchmark Report 2026, based on its platform data for 2025, puts the average cold email reply rate at 3.43%. The top quarter of senders get 5.5% or more, and the top 10% get over 10%.

In our experience, a reply rate under 1% usually means a deliverability problem. A reply rate over 1% with fewer than 10% of replies positive usually points to the message, the offer or the people receiving them. Our own month sat in that second group, with 1.38% replying and about 10 of 330 replies, roughly 3%, positive.

We cover the full diagnosis in why outbound fails. The table below is the short version we use when a campaign stalls.

What you see What it usually means What to test next
Reply rate under 1% Emails are not reaching the inbox Domains, mailboxes and warm-up. Leave the copy alone for now.
Reply rate over 1%, under 10% positive, one broad list The list is too wide for one message Split the list into two or three niches and send them the same offer
Several niches tested, one clearly ahead You have found an audience that has the problem Two offers sent to the leading niche
Healthy positive replies, few meetings booked Replies are handled slowly or badly How fast leads get an answer and who answers them

How have other B2B firms found a better audience?

For a UK B2B SaaS company selling to finance teams, we added finance leaders at construction, logistics and engineering conglomerates to the target list. That more than tripled the market the company could reach. Over 6 months the campaign contacted 12,754 senior finance leaders and got 723 replies (5.7%), which led to 52 qualified meetings, 7.2% of replies.

Historic Productions, a UK historic research firm, needed an audience that no database covered. We built custom scrapers across heritage registries, conservation maps and planning records to find UK historic property owners. We contacted 1,415 of them and got 306 replies, a 21.6% reply rate, which led to 14 meetings and 3 clients worth EUR 45,000 in one month.

Both reply rates are well above Instantly’s 3.43% average. For the SaaS company, the new segments gave it more people with the problem to write to. For Historic Productions, building the list was most of the work, because there was no list to buy.

What order should you test in?

Our NPOT Methodology™ starts with N for Niche, because the other parts depend on it. A niche is an industry plus a job title, for example Operations Directors at European logistics companies. The Problem, Outreach Offer and Target Outcome only make sense once you know who will read them.

For an audience test, write a short NPOT for each niche and keep the offer the same across all of them. If Finance Directors at construction groups reply and Finance Directors at retail chains stay quiet, the difference comes from the audience. You can then describe the Problem and Target Outcome more precisely for the niche that answered.

  1. Fix deliverability and get the reply rate above 1% before you judge anything else.
  2. Choose two or three niches, write each one as an industry plus a job title, and give each its own campaign.
  3. Send the same offer and similar copy to every niche, so the audience is the only thing that changes.
  4. Compare positive replies per 1,000 emails sent, then meetings booked. Count out-of-office messages separately.
  5. Move most of your volume to the niche that leads, and keep a small share for testing new niches.
  6. Test two offers on the leading niche, with the audience and channel kept the same.
  7. Test subject lines and smaller copy changes last.

When does it make sense to test the offer?

Test the offer once one audience has shown interest. Our work with The C Collective, an agency client, is a clear example. Over three months we sent two angles to the same audience on the same channels.

Inviting prospects to contribute to a research project booked 26 meetings. A networking angle booked 16, so the research angle produced 63% more meetings. In NPOT terms, the research invite was a better Outreach Offer because it asked for a small step and gave the prospect something worth taking part in.

Because the audience and channels stayed the same, the gap between 26 and 16 can be put down to the offer. If we had changed the audience at the same time, we would not know which change caused the result.

The Problem you name is part of the offer test too. A US MedTech firm selling to HR leaders had been describing its product in technical terms, such as biomarkers and AI accuracy. We kept the HR audience and rewrote the messaging around absenteeism, insurance claims and productivity. Over 3 months the campaign reached 4,376 prospects, got 352 replies (8.0%) and booked 17 qualified meetings, with $217,000 in revenue.

Is a narrow niche worth it if the reply rate is low?

It can be, when the value of each client is high. Future Practice, a dental marketing agency, contacted 4,590 dental practice owners. That produced 9 positive replies, a 0.2% positive reply rate, then 5 meetings, 3 of them in the core ICP, and 2 new clients worth $52,200.

A 0.2% positive rate sounds low, but it cannot be compared with Instantly’s 3.43% average, which counts every reply. Dental practice owners are a hard audience to reach, and two clients from that niche still returned many times the campaign cost.

When you compare niches in an audience test, judge each one by positive replies, meetings and the value of a client in that niche. A niche with a low reply rate and large deals can be worth more than a broad list with a higher reply rate and small deals.

What we’d do

If you have a campaign running now, you can start on these steps this week.

  • Export last month’s results and work out positive replies per 1,000 emails sent for each list or segment.
  • Check the overall reply rate. If it is under 1%, fix deliverability before any other test.
  • Look at where your best current clients come from, pick the two niches they represent and write each as an industry plus a job title.
  • Build a list for each niche and send both lists the offer you already use.
  • Decide in advance what result will move volume to a niche, so you are not making the call on feel after three replies.

If you would like help choosing which audiences to test, get a complimentary outbound campaign drafted for your business. We build one campaign for you, with the audience, offer and copy.

FAQ

How many emails should each audience test get before I judge it?

Usually we look for at least 1,000 leads contacted.

Should I change the offer for each niche during an audience test?

Keep the offer and the structure of the copy the same across niches during the test. Change only the lines that name the niche and its problem. If you change the audience and the offer together, you cannot tell which change caused the result. Once one niche leads, write an offer for it using the Problem and Target Outcome from your NPOT.

Do out-of-office replies count when I compare audiences?

Leave them out. In our own four-week sample, most of the 330 replies were out-of-office messages, and only about 10 were positive. Counting every reply would have made the broad campaigns look healthier than they were. Compare niches on positive replies per 1,000 emails sent, then on meetings booked and the value of a client in each niche.

Can I run audience tests on LinkedIn instead of email?

You can, if the audience is active on LinkedIn and uses its messages for work conversations, as many tech founders do. Email is usually the better place to test audiences because it scales, so you can reach several niches at once with enough volume to compare them. LinkedIn suits a smaller, active niche you have already identified.

What if none of the audiences I test reply?

Check deliverability before anything else. If the reply rate is under 1%, the emails are probably not reaching inboxes, and no audience or offer test will tell you much. If emails are landing and every niche stays quiet, look at the Problem in your NPOT. You may be describing a symptom the prospect does not connect with your service.


Want to Turn Outbound Into a Predictable Source of Pipeline?

Thanks for reading this article, I hope you found it useful. I'm Tudor Dumitrescu, founder of TANDA Digital (P.S. follow me on LinkedIn here).

If you're looking to generate more qualified pipeline through outbound, here are two ways we can help:

1. Get a Complimentary Outbound Campaign Drafted For You

We open every potential engagement with a complimentary outbound campaign that includes the messaging and 25 target accounts (+ decision-makers) created for you. Get Your Free Outbound Campaign

2. Book a Call

If you're not sure if outbound is the right move, you can book a call with our team. We'll assess your current situation and tell you if outbound could generate pipeline for your business.


Click to Share:

Facebook
Twitter
LinkedIn

Get our Step-by-Step Playbook To Master Industrial-Scale Cold Email™

Please refer to our Privacy Policy for details of how and why we process your data. 

Share This Post

More From Our Business Growth Blog

Contact Us

We’ll get back to you within 24-hours.

TANDA Digital collects the above information in order to be able to process your inquiry and contact you. You can opt out of all communications at any time. To learn more about how we process your data, read our Privacy Policy.